CDW Most Frequently Asked Latest C Language Interview Questions Answers
What are preprocessor directives?
Preprocessor directives are placed at the beginning of every C program. This is where library files are specified, which would depend on what functions are to be used in the program. Another use of preprocessor directives is the declaration of constants.Preprocessor directives begin with the # symbol.
What will be the outcome of the following conditional statement if the value of variable s is 10?
s >=10 && s < 25 && s!=12
The outcome will be TRUE. Since the value of s is 10, s >= 10 evaluates to TRUE because s is not greater than 10 but is still equal to 10. s< 25 is also TRUE since 10 is less then 25. Just the same, s!=12, which means s is not equal to 12, evaluates to TRUE. The && is the AND operator, and follows the rule that if all individual conditions are TRUE, the entire statement is TRUE.
Describe the order of precedence with regards to operators in C.
Order of precedence determines which operation must first take place in an operation statement or conditional statement. On the top most level of precedence are the unary operators !, +, – and &. It is followed by the regular mathematical operators (*, / and modulus % first, followed by + and -). Next in line are the relational operators <, <=, >= and >. This is then followed by the two equality operators == and !=. The logical operators && and || are next evaluated. On the last level is the assignment operator =.
What is wrong with this statement? myName = “Robin”;
You cannot use the = sign to assign values to a string variable. Instead, use the strcpy function. The correct statement would be: strcpy(myName, “Robin”);
How do you determine the length of a string value that was stored in a variable?
To get the length of a string value, use the function strlen(). For example, if you have a variable named FullName, you can get the length of the stored string value by using this statement: I = strlen(FullName); the variable I will now have the character length of the string value.
Is it possible to initialize a variable at the time it was declared?
Yes, you don’t have to write a separate assignment statement after the variable declaration, unless you plan to change it later on. For example: char planet[15] = “Earth”; does two things: it declares a string variable named planet, then initializes it with the value “Earth”.
Why is C language being considered a middle level language?
This is because C language is rich in features that make it behave like a high level language while at the same time can interact with hardware using low level methods. The use of a well structured approach to programming, coupled with English-like words used in functions, makes it act as a high level language. On the other hand, C can directly access memory structures similar to assembly language routines.
What are the different file extensions involved when programming in C?
Source codes in C are saved with .C file extension. Header files or library files have the .H file extension. Every time a program source code is successfully compiled, it creates an .OBJ object file, and an executable .EXE file.
What are reserved words?
Reserved words are words that are part of the standard C language library. This means that reserved words have special meaning and therefore cannot be used for purposes other than what it is originally intended for. Examples of reserved words are int, void, and return.
What are linked list?
A linked list is composed of nodes that are connected with another. In C programming, linked lists are created using pointers. Using linked lists is one efficient way of utilizing memory for storage.
What is FIFO?
In C programming, there is a data structure known as queue. In this structure, data is stored and accessed using FIFO format, or First-In-First-Out. A queue represents a line wherein the first data that was stored will be the first one that is accessible as well.
What is the significance of an algorithm to C programming?
Before a program can be written, an algorithm has to be created first. An algorithm provides a step by step procedure on how a solution can be derived. It also acts as a blueprint on how a program will start and end, including what process and computations are involved.
What is the advantage of an array over individual variables?
When storing multiple related data, it is a good idea to use arrays. This is because arrays are named using only 1 word followed by an element number. For example: to store the 10 test results of 1 student, one can use 10 different variable names (grade1, grade2, grade3… grade10). With arrays, only 1 name is used, the rest are accessible through the index name (grade[0], grade[1], grade[2]… grade[9]).
Write a loop statement that will show the following output:
1
12
123
1234
12345
Answer:
for (a=1; a<=5; i++) {
for (b=1; b<=a; b++)
printf("%d",b);
printf("\n");
}
What is wrong in this statement? scanf(“%d”,whatnumber);
An ampersand & symbol must be placed before the variable name whatnumber. Placing & means whatever integer value is entered by the user is stored at the “address” of the variable name. This is a common mistake for programmers, often leading to logical errors.
How do you generate random numbers in C?
Random numbers are generated in C using the rand() command. For example: anyNum = rand() will generate any integer number beginning from 0, assuming that anyNum is a variable of type integer.
What could possibly be the problem if a valid function name such as tolower() is being reported by the C compiler as undefined?
The most probable reason behind this error is that the header file for that function was not indicated at the top of the program. Header files contain the definition and prototype for functions and commands used in a C program. In the case of “tolower()”, the code “#include <ctype.h>” must be present at the beginning of the program.
What are comments and how do you insert it in a C program?
Comments are a great way to put some remarks or description in a program. It can serves as a reminder on what the program is all about, or a description on why a certain code or function was placed there in the first place. Comments begin with /* and ended by */ characters. Comments can be a single line, or can even span several lines. It can be placed anywhere in the program.
What is debugging?
Debugging is the process of identifying errors within a program. During program compilation, errors that are found will stop the program from executing completely. At this state, the programmer would look into the possible portions where the error occurred. Debugging ensures the removal of errors, and plays an important role in ensuring that the expected program output is met.
What are binary trees?
Binary trees are actually an extension of the concept of linked lists. A binary tree has two pointers, a left one and a right one. Each side can further branch to form additional nodes, which each node having two pointers as well.
Not all reserved words are written in lowercase. TRUE or FALSE?
FALSE. All reserved words must be written in lowercase; otherwise the C compiler would interpret this as unidentified and invalid.
What is the difference between the expression “++a” and “a++”?
In the first expression, the increment would happen first on variable a, and the resulting value will be the one to be used. This is also known as a prefix increment. In the second expression, the current value of variable a would the one to be used in an operation, before the value of a itself is incremented. This is also known as postfix increment.
What are preprocessor directives?
Preprocessor directives are placed at the beginning of every C program. This is where library files are specified, which would depend on what functions are to be used in the program. Another use of preprocessor directives is the declaration of constants.Preprocessor directives begin with the # symbol.
What will be the outcome of the following conditional statement if the value of variable s is 10?
s >=10 && s < 25 && s!=12
The outcome will be TRUE. Since the value of s is 10, s >= 10 evaluates to TRUE because s is not greater than 10 but is still equal to 10. s< 25 is also TRUE since 10 is less then 25. Just the same, s!=12, which means s is not equal to 12, evaluates to TRUE. The && is the AND operator, and follows the rule that if all individual conditions are TRUE, the entire statement is TRUE.
Describe the order of precedence with regards to operators in C.
Order of precedence determines which operation must first take place in an operation statement or conditional statement. On the top most level of precedence are the unary operators !, +, – and &. It is followed by the regular mathematical operators (*, / and modulus % first, followed by + and -). Next in line are the relational operators <, <=, >= and >. This is then followed by the two equality operators == and !=. The logical operators && and || are next evaluated. On the last level is the assignment operator =.
 |
| CDW Most Frequently Asked Latest C Language Interview Questions Answers |
What is wrong with this statement? myName = “Robin”;
You cannot use the = sign to assign values to a string variable. Instead, use the strcpy function. The correct statement would be: strcpy(myName, “Robin”);
How do you determine the length of a string value that was stored in a variable?
To get the length of a string value, use the function strlen(). For example, if you have a variable named FullName, you can get the length of the stored string value by using this statement: I = strlen(FullName); the variable I will now have the character length of the string value.
Is it possible to initialize a variable at the time it was declared?
Yes, you don’t have to write a separate assignment statement after the variable declaration, unless you plan to change it later on. For example: char planet[15] = “Earth”; does two things: it declares a string variable named planet, then initializes it with the value “Earth”.
Why is C language being considered a middle level language?
This is because C language is rich in features that make it behave like a high level language while at the same time can interact with hardware using low level methods. The use of a well structured approach to programming, coupled with English-like words used in functions, makes it act as a high level language. On the other hand, C can directly access memory structures similar to assembly language routines.
What are the different file extensions involved when programming in C?
Source codes in C are saved with .C file extension. Header files or library files have the .H file extension. Every time a program source code is successfully compiled, it creates an .OBJ object file, and an executable .EXE file.
What are reserved words?
Reserved words are words that are part of the standard C language library. This means that reserved words have special meaning and therefore cannot be used for purposes other than what it is originally intended for. Examples of reserved words are int, void, and return.
What are linked list?
A linked list is composed of nodes that are connected with another. In C programming, linked lists are created using pointers. Using linked lists is one efficient way of utilizing memory for storage.
What is FIFO?
In C programming, there is a data structure known as queue. In this structure, data is stored and accessed using FIFO format, or First-In-First-Out. A queue represents a line wherein the first data that was stored will be the first one that is accessible as well.
What is the significance of an algorithm to C programming?
Before a program can be written, an algorithm has to be created first. An algorithm provides a step by step procedure on how a solution can be derived. It also acts as a blueprint on how a program will start and end, including what process and computations are involved.
What is the advantage of an array over individual variables?
When storing multiple related data, it is a good idea to use arrays. This is because arrays are named using only 1 word followed by an element number. For example: to store the 10 test results of 1 student, one can use 10 different variable names (grade1, grade2, grade3… grade10). With arrays, only 1 name is used, the rest are accessible through the index name (grade[0], grade[1], grade[2]… grade[9]).
Write a loop statement that will show the following output:
1
12
123
1234
12345
Answer:
for (a=1; a<=5; i++) {
for (b=1; b<=a; b++)
printf("%d",b);
printf("\n");
}
What is wrong in this statement? scanf(“%d”,whatnumber);
An ampersand & symbol must be placed before the variable name whatnumber. Placing & means whatever integer value is entered by the user is stored at the “address” of the variable name. This is a common mistake for programmers, often leading to logical errors.
How do you generate random numbers in C?
Random numbers are generated in C using the rand() command. For example: anyNum = rand() will generate any integer number beginning from 0, assuming that anyNum is a variable of type integer.
What could possibly be the problem if a valid function name such as tolower() is being reported by the C compiler as undefined?
The most probable reason behind this error is that the header file for that function was not indicated at the top of the program. Header files contain the definition and prototype for functions and commands used in a C program. In the case of “tolower()”, the code “#include <ctype.h>” must be present at the beginning of the program.
What are comments and how do you insert it in a C program?
Comments are a great way to put some remarks or description in a program. It can serves as a reminder on what the program is all about, or a description on why a certain code or function was placed there in the first place. Comments begin with /* and ended by */ characters. Comments can be a single line, or can even span several lines. It can be placed anywhere in the program.
What is debugging?
Debugging is the process of identifying errors within a program. During program compilation, errors that are found will stop the program from executing completely. At this state, the programmer would look into the possible portions where the error occurred. Debugging ensures the removal of errors, and plays an important role in ensuring that the expected program output is met.
What are binary trees?
Binary trees are actually an extension of the concept of linked lists. A binary tree has two pointers, a left one and a right one. Each side can further branch to form additional nodes, which each node having two pointers as well.
Not all reserved words are written in lowercase. TRUE or FALSE?
FALSE. All reserved words must be written in lowercase; otherwise the C compiler would interpret this as unidentified and invalid.
What is the difference between the expression “++a” and “a++”?
In the first expression, the increment would happen first on variable a, and the resulting value will be the one to be used. This is also known as a prefix increment. In the second expression, the current value of variable a would the one to be used in an operation, before the value of a itself is incremented. This is also known as postfix increment.
Post a Comment