C Language Advanced Experienced Level Interview Questions Answers
What are variables and it what way is it different from constants?
Variables and constants may at first look similar in a sense that both are identifiers made up of one character or more characters (letters, numbers and a few allowable symbols). Both will also hold a particular value. Values held by a variable can be altered throughout the program, and can be used in most operations and computations. Constants are given values at one time only, placed at the beginning of a program. This value is not altered in the program. For example, you can assigned a constant named PI and give it a value 3.1415 . You can then use it as PI in the program, instead of having to write 3.1415 each time you need it.
How do you construct an increment statement or decrement statement in C?
There are actually two ways you can do this. One is to use the increment operator ++ and decrement operator –. For example, the statement “x++” means to increment the value of x by 1. Likewise, the statement “x –” means to decrement the value of x by 1. Another way of writing increment statements is to use the conventional + plus sign or – minus sign. In the case of “x++”, another way to write it is “x = x +1″.
What is the difference between Call by Value and Call by Reference?
When using Call by Value, you are sending the value of a variable as parameter to a function, whereas Call by Reference sends the address of the variable. Also, under Call by Value, the value in the parameter is not affected by whatever operation that takes place, while in the case of Call by Reference, values can be affected by the process within the function.
Some coders debug their programs by placing comment symbols on some codes instead of deleting it. How does this aid in debugging?
Placing comment symbols /* */ around a code, also referred to as “commenting out”, is a way of isolating some codes that you think maybe causing errors in the program, without deleting the code. The idea is that if the code is in fact correct, you simply remove the comment symbols and continue on. It also saves you time and effort on having to retype the codes if you have deleted it in the first place.
What is the equivalent code of the following statement in WHILE LOOP format?
for (a=1; a<=100; a++)
printf ("%d\n", a * a);
Answer:
a=1;
while (a<=100) {
printf ("%d\n", a * a);
a++;
How do you access the values within an array?
Arrays contain a number of elements, depending on the size you gave it during variable declaration. Each element is assigned a number from 0 to number of elements-1. To assign or retrieve the value of a particular element, refer to the element number. For example: if you have a declaration that says “intscores[5];”, then you have 5 accessible elements, namely: scores[0], scores[1], scores[2], scores[3] and scores[4].
Can I use “int” data type to store the value 32768? Why?
No. “int” data type is capable of storing values from -32768 to 32767. To store 32768, you can use “long int” instead. You can also use “unsigned int”, assuming you don’t intend to store negative values.
Can two or more operators such as \n and \t be combined in a single line of program code?
Yes, it’s perfectly valid to combine operators, especially if the need arises. For example: you can have a code like ” printf (“Hello\n\n\’World\'”) ” to output the text “Hello” on the first line and “World” enclosed in single quotes to appear on the next two lines.
Write a program to check Armstrong number in C?
#include<stdio.h>
#include<conio.h>
main()
{
int n,r,sum=0,temp; //declaration of variables.
clrscr(); //It clears the screen.
printf("enter the number=");
scanf("%d",&n);
temp=n;
while(n>0)
{
r=n%10;
sum=sum+(r*r*r);
n=n/10;
}
if(temp==sum)
printf("armstrong number ");
else
printf("not armstrong number");
getch(); //It reads a character from the keyword.
}
Write a program to reverse a given number in C?
#include<stdio.h>
#include<conio.h>
main()
{
int n, reverse=0, rem; //declaration of variables.
clrscr(); // It clears the screen.
printf("Enter a number: ");
scanf("%d", &n);
while(n!=0)
{
rem=n%10;
reverse=reverse*10+rem;
n/=10;
}
printf("Reversed Number: %d",reverse);
getch(); // It reads a character from the keyword.
}
What does the && operator do in a program code?
The && is also referred to as AND operator. When using this operator, all conditions specified must be TRUE before the next action can be performed. If you have 10 conditions and all but 1 fails to evaluate as TRUE, the entire condition statement is already evaluated as FALSE.
In C programming, what command or code can be used to determine if a number of odd or even?
There is no single command or function in C that can check if a number is odd or even. However, this can be accomplished by dividing that number by 2, then checking the remainder. If the remainder is 0, then that number is even, otherwise, it is odd. You can write it in code as:
if (num % 2 == 0)
printf("EVEN");
else
printf("ODD");
What does the format %10.2 mean when included in a printf statement?
This format is used for two things: to set the number of spaces allotted for the output number and to set the number of decimal places. The number before the decimal point is for the allotted space, in this case it would allot 10 spaces for the output number. If the number of space occupied by the output number is less than 10, addition space characters will be inserted before the actual output number. The number after the decimal point sets the number of decimal places, in this case, it’s 2 decimal spaces.
What are logical errors and how does it differ from syntax errors?
Program that contains logical errors tend to pass the compilation process, but the resulting output may not be the expected one. This happens when a wrong formula was inserted into the code, or a wrong sequence of commands was performed. Syntax errors, on the other hand, deal with incorrect commands that are misspelled or not recognized by the compiler.
What is the use of a semicolon (;) at the end of every program statement?
It has to do with the parsing process and compilation of the code. A semicolon acts as a delimiter, so that the compiler knows where each statement ends, and can proceed to divide the statement into smaller elements for syntax checking.
What is difference between i++ and ++i?
1) The expression ‘i++’ returns the old value and then increments i. The expression ++i increments the value and returns new value.
2) Precedence of postfix ++ is higher than that of prefix ++.
3) Associativity of postfix ++ is left to right and associativity of prefix ++ is right to left.
4) In C++, ++i can be used as l-value, but i++ cannot be. In C, they both cannot be used as l-value.
What is l-value?
l-value or location value refers to an expression that can be used on left side of assignment operator. For example in expression “a = 3”, a is l-value and 3 is r-value.
l-values are of two types:
“nonmodifiable l-value” represent a l-value that can not be modified. const variables are “nonmodifiable l-value”.
“modifiable l-value” represent a l-value that can be modified.
How to write your own sizeof operator?
#define my_sizeof(type) (char *)(&type+1)-(char*)(&type)
How will you print numbers from 1 to 100 without using loop?
We can use recursion for this purpose.
/* Prints numbers from 1 to n */
void printNos(unsigned int n)
{
if(n > 0)
{
printNos(n-1);
printf("%d ", n);
}
}
What is volatile keyword?
The volatile keyword is intended to prevent the compiler from applying any optimizations on objects that can change in ways that cannot be determined by the compiler.
Objects declared as volatile are omitted from optimization because their values can be changed by code outside the scope of current code at any time. See Understanding “volatile” qualifier in C for more details.
Can a variable be both const and volatile?
yes, the const means that the variable cannot be assigned a new value. The value can be changed by other code or pointer. For example the following program works fine.
int main(void)
{
const volatile int local = 10;
int *ptr = (int*) &local;
printf("Initial value of local : %d \n", local);
*ptr = 100;
printf("Modified value of local: %d \n", local);
return 0;
}
Write a program to print "hello world" without using a semicolon?
#include<stdio.h>
void main(){
if(printf("hello world")){} // It prints the ?hello world? on the screen.
}
Write a program to swap two numbers without using the third variable?
#include<stdio.h>
#include<conio.h>
main()
{
int a=10, b=20; //declaration of variables.
clrscr(); //It clears the screen.
printf("Before swap a=%d b=%d",a,b);
a=a+b;//a=30 (10+20)
b=a-b;//b=10 (30-20)
a=a-b;//a=20 (30-10)
printf("\nAfter swap a=%d b=%d",a,b);
getch();
}
Write a program to print Fibonacci series without using recursion?
#include<stdio.h>
#include<conio.h>
void main()
{
int n1=0,n2=1,n3,i,number;
clrscr();
printf("Enter the number of elements:");
scanf("%d",&number);
printf("\n%d %d",n1,n2);//printing 0 and 1
for(i=2;i<number;++i)//loop starts from 2 because 0 and 1 are already printed
{
n3=n1+n2;
printf(" %d",n3);
n1=n2;
n2=n3;
}
getch();
}
What are the different types of control structures in programming?
There are 3 main control structures in programming: Sequence, Selection and Repetition. Sequential control follows a top to bottom flow in executing a program, such that step 1 is first perform, followed by step 2, all the way until the last step is performed. Selection deals with conditional statements, which mean codes are executed depending on the evaluation of conditions as being TRUE or FALSE. This also means that not all codes may be executed, and there are alternative flows within. Repetitions are also known as loop structures, and will repeat one or two program statements set by a counter.
What is || operator and how does it function in a program?
The || is also known as the OR operator in C programming. When using || to evaluate logical conditions, any condition that evaluates to TRUE will render the entire condition statement as TRUE.
Can the “if” function be used in comparing strings?
No. “if” command can only be used to compare numerical values and single character values. For comparing string values, there is another function called strcmp that deals specifically with strings.
What are preprocessor directives?
Preprocessor directives are placed at the beginning of every C program. This is where library files are specified, which would depend on what functions are to be used in the program. Another use of preprocessor directives is the declaration of constants.Preprocessor directives begin with the # symbol.
What will be the outcome of the following conditional statement if the value of variable s is 10?
s >=10 && s < 25 && s!=12
The outcome will be TRUE. Since the value of s is 10, s >= 10 evaluates to TRUE because s is not greater than 10 but is still equal to 10. s< 25 is also TRUE since 10 is less then 25. Just the same, s!=12, which means s is not equal to 12, evaluates to TRUE. The && is the AND operator, and follows the rule that if all individual conditions are TRUE, the entire statement is TRUE.
Describe the order of precedence with regards to operators in C.
Order of precedence determines which operation must first take place in an operation statement or conditional statement. On the top most level of precedence are the unary operators !, +, – and &. It is followed by the regular mathematical operators (*, / and modulus % first, followed by + and -). Next in line are the relational operators <, <=, >= and >. This is then followed by the two equality operators == and !=. The logical operators && and || are next evaluated. On the last level is the assignment operator =.
What is wrong with this statement? myName = “Robin”;
You cannot use the = sign to assign values to a string variable. Instead, use the strcpy function. The correct statement would be: strcpy(myName, “Robin”);
How do you determine the length of a string value that was stored in a variable?
To get the length of a string value, use the function strlen(). For example, if you have a variable named FullName, you can get the length of the stored string value by using this statement: I = strlen(FullName); the variable I will now have the character length of the string value.
Is it possible to initialize a variable at the time it was declared?
Yes, you don’t have to write a separate assignment statement after the variable declaration, unless you plan to change it later on. For example: char planet[15] = “Earth”; does two things: it declares a string variable named planet, then initializes it with the value “Earth”.
Write a loop statement that will show the following output:
1
12
123
1234
12345
Answer:
for (a=1; a<=5; i++) {
for (b=1; b<=a; b++)
printf("%d",b);
printf("\n");
}
What is wrong in this statement? scanf(“%d”,whatnumber);
An ampersand & symbol must be placed before the variable name whatnumber. Placing & means whatever integer value is entered by the user is stored at the “address” of the variable name. This is a common mistake for programmers, often leading to logical errors.
How do you generate random numbers in C?
Random numbers are generated in C using the rand() command. For example: anyNum = rand() will generate any integer number beginning from 0, assuming that anyNum is a variable of type integer.
What could possibly be the problem if a valid function name such as tolower() is being reported by the C compiler as undefined?
The most probable reason behind this error is that the header file for that function was not indicated at the top of the program. Header files contain the definition and prototype for functions and commands used in a C program. In the case of “tolower()”, the code “#include <ctype.h>” must be present at the beginning of the program.
Write a program to print factorial of given number without using recursion?
#include<stdio.h>
#include<conio.h>
void main(){
int i,fact=1,number;
clrscr();
printf("Enter a number: ");
scanf("%d",&number);
for(i=1;i<=number;i++){
fact=fact*i;
}
printf("Factorial of %d is: %d",number,fact);
getch();
}
Write a program to print factorial of given number using recursion?
#include<stdio.h>
#include<conio.h>
long factorial(int n) // function to calculate the factorial of a given number.
{
if (n == 0)
return 1;
else
return(n * factorial(n-1)); //calling the function recursively.
}
void main()
{
int number; //declaration of variables.
long fact;
clrscr();
printf("Enter a number: ");
scanf("%d", &number);
fact = factorial(number); //calling a function.
printf("Factorial of %d is %ld\n", number, fact);
getch(); //It reads a character from the keyword.
}
The % symbol has a special use in a printf statement. How would you place this character as part of the output on the screen?
You can do this by using %% in the printf statement. For example, you can write printf(“10%%”) to have the output appear as 10% on the screen.
How do you search data in a data file using random access method?
Use the fseek() function to perform random access input/ouput on a file. After the file was opened by the fopen() function, the fseek would require three parameters to work: a file pointer to the file, the number of bytes to search, and the point of origin in the file.
Are comments included during the compilation stage and placed in the EXE file as well?
No, comments that were encountered by the compiler are disregarded. Comments are mostly for the guidance of the programmer only and do not have any other significant use in the program functionality.
Is there a built-in function in C that can be used for sorting data?
Yes, use the qsort() function. It is also possible to create user defined functions for sorting, such as those based on the balloon sort and bubble sort algorithm.
What are the advantages and disadvantages of a heap?
Storing data on the heap is slower than it would take when using the stack. However, the main advantage of using the heap is its flexibility. That’s because memory in this structure can be allocated and remove in any particular order. Slowness in the heap can be compensated if an algorithm was well designed and implemented.
How do you convert strings to numbers in C?
You can write you own functions to do string to number conversions, or instead use C’s built in functions. You can use atof to convert to a floating point value, atoi to convert to an integer value, and atol to convert to a long integer value.
Create a simple code fragment that will swap the values of two variables num1 and num2.
int temp;
temp = num1;
num1 = num2;
num2 = temp;
Write a program to print Fibonacci series using recursion?
#include<stdio.h>
#include<conio.h>
void printFibonacci(int n) // function to calculate the fibonacci series of a given number.
{
static int n1=0,n2=1,n3; // declaration of static variables.
if(n>0){
n3 = n1 + n2;
n1 = n2;
n2 = n3;
printf("%d ",n3);
printFibonacci(n-1); //calling the function recursively.
}
}
void main(){
int n;
clrscr();
printf("Enter the number of elements: ");
scanf("%d",&n);
printf("Fibonacci Series: ");
printf("%d %d ",0,1);
printFibonacci(n-2);//n-2 because 2 numbers are already printed
getch();
}
Write a program to check prime number in C Programming?
#include<stdio.h>
#include<conio.h>
void main()
{
int n,i,m=0,flag=0; //declaration of variables.
clrscr(); //It clears the screen.
printf("Enter the number to check prime:");
scanf("%d",&n);
m=n/2;
for(i=2;i<=m;i++)
{
if(n%i==0)
{
printf("Number is not prime");
flag=1;
break; //break keyword used to terminate from the loop.
}
}
if(flag==0)
printf("Number is prime");
getch(); //It reads a character from the keyword.
}
Write a program to check palindrome number in C Programming?
#include<stdio.h>
#include<conio.h>
main()
{
int n,r,sum=0,temp;
clrscr();
printf("enter the number=");
scanf("%d",&n);
temp=n;
while(n>0)
{
r=n%10;
sum=(sum*10)+r;
n=n/10;
}
if(temp==sum)
printf("palindrome number ");
else
printf("not palindrome");
getch();
}
What are variables and it what way is it different from constants?
Variables and constants may at first look similar in a sense that both are identifiers made up of one character or more characters (letters, numbers and a few allowable symbols). Both will also hold a particular value. Values held by a variable can be altered throughout the program, and can be used in most operations and computations. Constants are given values at one time only, placed at the beginning of a program. This value is not altered in the program. For example, you can assigned a constant named PI and give it a value 3.1415 . You can then use it as PI in the program, instead of having to write 3.1415 each time you need it.
How do you construct an increment statement or decrement statement in C?
There are actually two ways you can do this. One is to use the increment operator ++ and decrement operator –. For example, the statement “x++” means to increment the value of x by 1. Likewise, the statement “x –” means to decrement the value of x by 1. Another way of writing increment statements is to use the conventional + plus sign or – minus sign. In the case of “x++”, another way to write it is “x = x +1″.
What is the difference between Call by Value and Call by Reference?
When using Call by Value, you are sending the value of a variable as parameter to a function, whereas Call by Reference sends the address of the variable. Also, under Call by Value, the value in the parameter is not affected by whatever operation that takes place, while in the case of Call by Reference, values can be affected by the process within the function.
Some coders debug their programs by placing comment symbols on some codes instead of deleting it. How does this aid in debugging?
Placing comment symbols /* */ around a code, also referred to as “commenting out”, is a way of isolating some codes that you think maybe causing errors in the program, without deleting the code. The idea is that if the code is in fact correct, you simply remove the comment symbols and continue on. It also saves you time and effort on having to retype the codes if you have deleted it in the first place.
What is the equivalent code of the following statement in WHILE LOOP format?
for (a=1; a<=100; a++)
printf ("%d\n", a * a);
Answer:
a=1;
while (a<=100) {
printf ("%d\n", a * a);
a++;
}
Arrays contain a number of elements, depending on the size you gave it during variable declaration. Each element is assigned a number from 0 to number of elements-1. To assign or retrieve the value of a particular element, refer to the element number. For example: if you have a declaration that says “intscores[5];”, then you have 5 accessible elements, namely: scores[0], scores[1], scores[2], scores[3] and scores[4].
Can I use “int” data type to store the value 32768? Why?
No. “int” data type is capable of storing values from -32768 to 32767. To store 32768, you can use “long int” instead. You can also use “unsigned int”, assuming you don’t intend to store negative values.
Can two or more operators such as \n and \t be combined in a single line of program code?
Yes, it’s perfectly valid to combine operators, especially if the need arises. For example: you can have a code like ” printf (“Hello\n\n\’World\'”) ” to output the text “Hello” on the first line and “World” enclosed in single quotes to appear on the next two lines.
Write a program to check Armstrong number in C?
#include<stdio.h>
#include<conio.h>
main()
{
int n,r,sum=0,temp; //declaration of variables.
clrscr(); //It clears the screen.
printf("enter the number=");
scanf("%d",&n);
temp=n;
while(n>0)
{
r=n%10;
sum=sum+(r*r*r);
n=n/10;
}
if(temp==sum)
printf("armstrong number ");
else
printf("not armstrong number");
getch(); //It reads a character from the keyword.
}
Write a program to reverse a given number in C?
#include<stdio.h>
#include<conio.h>
main()
{
int n, reverse=0, rem; //declaration of variables.
clrscr(); // It clears the screen.
printf("Enter a number: ");
scanf("%d", &n);
while(n!=0)
{
rem=n%10;
reverse=reverse*10+rem;
n/=10;
}
printf("Reversed Number: %d",reverse);
getch(); // It reads a character from the keyword.
}
C Language Advanced Experienced Level Interview Questions Answers |
What does the && operator do in a program code?
The && is also referred to as AND operator. When using this operator, all conditions specified must be TRUE before the next action can be performed. If you have 10 conditions and all but 1 fails to evaluate as TRUE, the entire condition statement is already evaluated as FALSE.
In C programming, what command or code can be used to determine if a number of odd or even?
There is no single command or function in C that can check if a number is odd or even. However, this can be accomplished by dividing that number by 2, then checking the remainder. If the remainder is 0, then that number is even, otherwise, it is odd. You can write it in code as:
if (num % 2 == 0)
printf("EVEN");
else
printf("ODD");
What does the format %10.2 mean when included in a printf statement?
This format is used for two things: to set the number of spaces allotted for the output number and to set the number of decimal places. The number before the decimal point is for the allotted space, in this case it would allot 10 spaces for the output number. If the number of space occupied by the output number is less than 10, addition space characters will be inserted before the actual output number. The number after the decimal point sets the number of decimal places, in this case, it’s 2 decimal spaces.
What are logical errors and how does it differ from syntax errors?
Program that contains logical errors tend to pass the compilation process, but the resulting output may not be the expected one. This happens when a wrong formula was inserted into the code, or a wrong sequence of commands was performed. Syntax errors, on the other hand, deal with incorrect commands that are misspelled or not recognized by the compiler.
What is the use of a semicolon (;) at the end of every program statement?
It has to do with the parsing process and compilation of the code. A semicolon acts as a delimiter, so that the compiler knows where each statement ends, and can proceed to divide the statement into smaller elements for syntax checking.
What is difference between i++ and ++i?
1) The expression ‘i++’ returns the old value and then increments i. The expression ++i increments the value and returns new value.
2) Precedence of postfix ++ is higher than that of prefix ++.
3) Associativity of postfix ++ is left to right and associativity of prefix ++ is right to left.
4) In C++, ++i can be used as l-value, but i++ cannot be. In C, they both cannot be used as l-value.
What is l-value?
l-value or location value refers to an expression that can be used on left side of assignment operator. For example in expression “a = 3”, a is l-value and 3 is r-value.
l-values are of two types:
“nonmodifiable l-value” represent a l-value that can not be modified. const variables are “nonmodifiable l-value”.
“modifiable l-value” represent a l-value that can be modified.
How to write your own sizeof operator?
#define my_sizeof(type) (char *)(&type+1)-(char*)(&type)
How will you print numbers from 1 to 100 without using loop?
We can use recursion for this purpose.
/* Prints numbers from 1 to n */
void printNos(unsigned int n)
{
if(n > 0)
{
printNos(n-1);
printf("%d ", n);
}
}
What is volatile keyword?
The volatile keyword is intended to prevent the compiler from applying any optimizations on objects that can change in ways that cannot be determined by the compiler.
Objects declared as volatile are omitted from optimization because their values can be changed by code outside the scope of current code at any time. See Understanding “volatile” qualifier in C for more details.
Can a variable be both const and volatile?
yes, the const means that the variable cannot be assigned a new value. The value can be changed by other code or pointer. For example the following program works fine.
int main(void)
{
const volatile int local = 10;
int *ptr = (int*) &local;
printf("Initial value of local : %d \n", local);
*ptr = 100;
printf("Modified value of local: %d \n", local);
return 0;
}
Write a program to print "hello world" without using a semicolon?
#include<stdio.h>
void main(){
if(printf("hello world")){} // It prints the ?hello world? on the screen.
}
Write a program to swap two numbers without using the third variable?
#include<stdio.h>
#include<conio.h>
main()
{
int a=10, b=20; //declaration of variables.
clrscr(); //It clears the screen.
printf("Before swap a=%d b=%d",a,b);
a=a+b;//a=30 (10+20)
b=a-b;//b=10 (30-20)
a=a-b;//a=20 (30-10)
printf("\nAfter swap a=%d b=%d",a,b);
getch();
}
Write a program to print Fibonacci series without using recursion?
#include<stdio.h>
#include<conio.h>
void main()
{
int n1=0,n2=1,n3,i,number;
clrscr();
printf("Enter the number of elements:");
scanf("%d",&number);
printf("\n%d %d",n1,n2);//printing 0 and 1
for(i=2;i<number;++i)//loop starts from 2 because 0 and 1 are already printed
{
n3=n1+n2;
printf(" %d",n3);
n1=n2;
n2=n3;
}
getch();
}
What are the different types of control structures in programming?
There are 3 main control structures in programming: Sequence, Selection and Repetition. Sequential control follows a top to bottom flow in executing a program, such that step 1 is first perform, followed by step 2, all the way until the last step is performed. Selection deals with conditional statements, which mean codes are executed depending on the evaluation of conditions as being TRUE or FALSE. This also means that not all codes may be executed, and there are alternative flows within. Repetitions are also known as loop structures, and will repeat one or two program statements set by a counter.
What is || operator and how does it function in a program?
The || is also known as the OR operator in C programming. When using || to evaluate logical conditions, any condition that evaluates to TRUE will render the entire condition statement as TRUE.
Can the “if” function be used in comparing strings?
No. “if” command can only be used to compare numerical values and single character values. For comparing string values, there is another function called strcmp that deals specifically with strings.
What are preprocessor directives?
Preprocessor directives are placed at the beginning of every C program. This is where library files are specified, which would depend on what functions are to be used in the program. Another use of preprocessor directives is the declaration of constants.Preprocessor directives begin with the # symbol.
What will be the outcome of the following conditional statement if the value of variable s is 10?
s >=10 && s < 25 && s!=12
The outcome will be TRUE. Since the value of s is 10, s >= 10 evaluates to TRUE because s is not greater than 10 but is still equal to 10. s< 25 is also TRUE since 10 is less then 25. Just the same, s!=12, which means s is not equal to 12, evaluates to TRUE. The && is the AND operator, and follows the rule that if all individual conditions are TRUE, the entire statement is TRUE.
Describe the order of precedence with regards to operators in C.
Order of precedence determines which operation must first take place in an operation statement or conditional statement. On the top most level of precedence are the unary operators !, +, – and &. It is followed by the regular mathematical operators (*, / and modulus % first, followed by + and -). Next in line are the relational operators <, <=, >= and >. This is then followed by the two equality operators == and !=. The logical operators && and || are next evaluated. On the last level is the assignment operator =.
What is wrong with this statement? myName = “Robin”;
You cannot use the = sign to assign values to a string variable. Instead, use the strcpy function. The correct statement would be: strcpy(myName, “Robin”);
How do you determine the length of a string value that was stored in a variable?
To get the length of a string value, use the function strlen(). For example, if you have a variable named FullName, you can get the length of the stored string value by using this statement: I = strlen(FullName); the variable I will now have the character length of the string value.
Is it possible to initialize a variable at the time it was declared?
Yes, you don’t have to write a separate assignment statement after the variable declaration, unless you plan to change it later on. For example: char planet[15] = “Earth”; does two things: it declares a string variable named planet, then initializes it with the value “Earth”.
Write a loop statement that will show the following output:
1
12
123
1234
12345
Answer:
for (a=1; a<=5; i++) {
for (b=1; b<=a; b++)
printf("%d",b);
printf("\n");
}
What is wrong in this statement? scanf(“%d”,whatnumber);
An ampersand & symbol must be placed before the variable name whatnumber. Placing & means whatever integer value is entered by the user is stored at the “address” of the variable name. This is a common mistake for programmers, often leading to logical errors.
How do you generate random numbers in C?
Random numbers are generated in C using the rand() command. For example: anyNum = rand() will generate any integer number beginning from 0, assuming that anyNum is a variable of type integer.
What could possibly be the problem if a valid function name such as tolower() is being reported by the C compiler as undefined?
The most probable reason behind this error is that the header file for that function was not indicated at the top of the program. Header files contain the definition and prototype for functions and commands used in a C program. In the case of “tolower()”, the code “#include <ctype.h>” must be present at the beginning of the program.
Write a program to print factorial of given number without using recursion?
#include<stdio.h>
#include<conio.h>
void main(){
int i,fact=1,number;
clrscr();
printf("Enter a number: ");
scanf("%d",&number);
for(i=1;i<=number;i++){
fact=fact*i;
}
printf("Factorial of %d is: %d",number,fact);
getch();
}
Write a program to print factorial of given number using recursion?
#include<stdio.h>
#include<conio.h>
long factorial(int n) // function to calculate the factorial of a given number.
{
if (n == 0)
return 1;
else
return(n * factorial(n-1)); //calling the function recursively.
}
void main()
{
int number; //declaration of variables.
long fact;
clrscr();
printf("Enter a number: ");
scanf("%d", &number);
fact = factorial(number); //calling a function.
printf("Factorial of %d is %ld\n", number, fact);
getch(); //It reads a character from the keyword.
}
The % symbol has a special use in a printf statement. How would you place this character as part of the output on the screen?
You can do this by using %% in the printf statement. For example, you can write printf(“10%%”) to have the output appear as 10% on the screen.
How do you search data in a data file using random access method?
Use the fseek() function to perform random access input/ouput on a file. After the file was opened by the fopen() function, the fseek would require three parameters to work: a file pointer to the file, the number of bytes to search, and the point of origin in the file.
Are comments included during the compilation stage and placed in the EXE file as well?
No, comments that were encountered by the compiler are disregarded. Comments are mostly for the guidance of the programmer only and do not have any other significant use in the program functionality.
Is there a built-in function in C that can be used for sorting data?
Yes, use the qsort() function. It is also possible to create user defined functions for sorting, such as those based on the balloon sort and bubble sort algorithm.
What are the advantages and disadvantages of a heap?
Storing data on the heap is slower than it would take when using the stack. However, the main advantage of using the heap is its flexibility. That’s because memory in this structure can be allocated and remove in any particular order. Slowness in the heap can be compensated if an algorithm was well designed and implemented.
How do you convert strings to numbers in C?
You can write you own functions to do string to number conversions, or instead use C’s built in functions. You can use atof to convert to a floating point value, atoi to convert to an integer value, and atol to convert to a long integer value.
Create a simple code fragment that will swap the values of two variables num1 and num2.
int temp;
temp = num1;
num1 = num2;
num2 = temp;
Write a program to print Fibonacci series using recursion?
#include<stdio.h>
#include<conio.h>
void printFibonacci(int n) // function to calculate the fibonacci series of a given number.
{
static int n1=0,n2=1,n3; // declaration of static variables.
if(n>0){
n3 = n1 + n2;
n1 = n2;
n2 = n3;
printf("%d ",n3);
printFibonacci(n-1); //calling the function recursively.
}
}
void main(){
int n;
clrscr();
printf("Enter the number of elements: ");
scanf("%d",&n);
printf("Fibonacci Series: ");
printf("%d %d ",0,1);
printFibonacci(n-2);//n-2 because 2 numbers are already printed
getch();
}
Write a program to check prime number in C Programming?
#include<stdio.h>
#include<conio.h>
void main()
{
int n,i,m=0,flag=0; //declaration of variables.
clrscr(); //It clears the screen.
printf("Enter the number to check prime:");
scanf("%d",&n);
m=n/2;
for(i=2;i<=m;i++)
{
if(n%i==0)
{
printf("Number is not prime");
flag=1;
break; //break keyword used to terminate from the loop.
}
}
if(flag==0)
printf("Number is prime");
getch(); //It reads a character from the keyword.
}
Write a program to check palindrome number in C Programming?
#include<stdio.h>
#include<conio.h>
main()
{
int n,r,sum=0,temp;
clrscr();
printf("enter the number=");
scanf("%d",&n);
temp=n;
while(n>0)
{
r=n%10;
sum=(sum*10)+r;
n=n/10;
}
if(temp==sum)
printf("palindrome number ");
else
printf("not palindrome");
getch();
}
Post a Comment