ThoughtWorks Most Frequently Asked HTML Interview Questions Answers
What Is Everyone Using To Write Html?
Everyone has a different preference for which tool works best for them. Keep in mind that typically the less HTML the tool requires you to know, the worse the output of the HTML. In other words, you can always do it better by hand if you take the time to learn a little HTML.
What Is A Doctype? Which One Do I Use?
According to HTML standards, each HTML document begins with a DOCTYPE declaration that specifies which version of HTML the document uses. Originally, the DOCTYPE declaration was used only by SGML-based tools like HTML validators, which needed to determine which version of HTML a document used (or claimed to use).
Today, many browsers use the document's DOCTYPE declaration to determine whether to use a stricter, more standards-oriented layout mode, or to use a "quirks" layout mode that attempts to emulate older, buggy browsers.
Can I Nest Tables Within Tables?
Yes, a table can be embedded inside a cell in another table. Here's a simple example
<table>
<tr>
<td>this is the first cell of the outer table</td>
<td>this is the second cell of the outer table,
with the inner table embedded in it
<table>
<tr>
<td>this is the first cell of the inner table</td>
<td>this is the second cell of the inner table</td>
</tr>
</table>
</td>
</tr>
</table>
The main caveat about nested tables is that older versions of Netscape Navigator have problems with them if you don't explicitly close your TR, TD, and TH elements. To avoid problems, include every </tr>, </td>, and </th> tag, even though the HTML specifications don't require them. Also, older versions of Netscape Navigator have problems with tables that are nested extremely deeply (e.g., tables nested ten deep). To avoid problems, avoid nesting tables more than a few deep. You may be able to use the ROWSPAN and COLSPAN attributes to minimize table nesting. Finally, be especially sure to validate your markup whenever you use nested tables.
How Do I Align A Table To The Right (or Left)?
You can use <TABLE ALIGN="right"> to float a table to the right. (Use ALIGN="left" to float it to the left.) Any content that follows the closing </TABLE> tag will flow around the table. Use <BR CLEAR="right"> or <BR CLEAR="all"> to mark the end of the text that is to flow around the table, as shown in this example
The table in this example will float to the right.
<table align="right">...</table>
This text will wrap to fill the available space to the left of (and if the text is long enough, below) the table.
<br clear="right">
This text will appear below the table, even if there is additional room to its left.
How Can I Use Tables To Structure Forms?
Small forms are sometimes placed within a TD element within a table. This can be a useful for positioning a form relative to other content, but it doesn't help position the form-related elements relative to each other.
To position form-related elements relative to each other, the entire table must be within the form. You cannot start a form in one TH or TD element and end in another. You cannot place the form within the table without placing it inside a TH or TD element. You can put the table inside the form, and then use the table to position the INPUT, TEXTAREA, SELECT, and other form-related elements, as shown in the following example.
<FORM ACTION="[URL]">
<TABLE BORDER="0">
<TR>
<TH>Account:</TH>
<TD><INPUT TYPE="text" NAME="account"></TD>
</TR>
<TR>
<TH>Password:</TH>
<TD><INPUT TYPE="password" NAME="password"></TD>
</TR>
<TR>
<TD> </TD>
<TD><INPUT TYPE="submit" NAME="Log On"></TD>
</TR>
</TABLE>
</FORM>
What Is A Tag?
In HTML, a tag tells the browser what to do. When you write an HTML page, you enter tags for many reasons -- to change the appearance of text, to show a graphic, or to make a link to another page.
What Is The Simplest Html Page?
HTML Code
<HTML>
<HEAD>
<TITLE>This is my page title! </TITLE>
</HEAD>
<BODY>
This is my message to the world!
</BODY>
</HTML>
Browser Display
This is my message to the world!
How Do I Create Frames? What Is A Frameset?
Frames allow an author to divide a browser window into multiple (rectangular) regions. Multiple documents can be displayed in a single window, each within its own frame. Graphical browsers allow these frames to be scrolled independently of each other, and links can update the document displayed in one frame without affecting the others.
You can't just "add frames" to an existing document. Rather, you must create a frameset document that defines a particular combination of frames, and then display your content documents inside those frames. The frameset document should also include alternative non-framed content in a NOFRAMES element. The HTML 4 frames model has significant design flaws that cause usability problems for web users. Frames should be used only with great care.
How Can I Include Comments In Html?
Technically, since HTML is an SGML application, HTML uses SGML comment syntax. However, the full syntax is complex, and browsers don't support it in its entirety anyway. Therefore, use the following simplified rule to create HTML comments that both have valid syntax and work in browsers
An HTML comment begins with "<!--", ends with "-->", and does not contain "--" or ">" anywhere in the comment.
The following are examples of HTML comments
* <!-- This is a comment. -->
* <!-- This is another comment,
and it continues onto a second line. -->
* <!---->
Do not put comments inside tags (i.e., between "<" and ">") in HTML markup.
What Is A Hypertext Link?
A hypertext link is a special tag that links one page to another page or resource. If you click the link, the browser jumps to the link's destination.
How Do I Center A Table?
In your HTML, use
<div class="center">
<table>...</table>
</div>
In your CSS, use
div.center {
text-align: center;
}
div.center table {
margin-left: auto;
margin-right: auto;
text-align: left;
}
How Do I Use Forms?
The basic syntax for a form is: <FORM ACTION="[URL]">...</FORM>
When the form is submitted, the form data is sent to the URL specified in the ACTION attribute. This URL should refer to a server-side (e.g., CGI) program that will process the form data. The form itself should contain
* at least one submit button (i.e., an <INPUT TYPE="submit" ...> element),
* form data elements (e.g., <INPUT>, <TEXTAREA>, and <SELECT>) as needed, and
* additional markup (e.g., identifying data elements, presenting instructions) as needed.
What Is Everyone Using To Write Html?
Everyone has a different preference for which tool works best for them. Keep in mind that typically the less HTML the tool requires you to know, the worse the output of the HTML. In other words, you can always do it better by hand if you take the time to learn a little HTML.
What Is A Doctype? Which One Do I Use?
According to HTML standards, each HTML document begins with a DOCTYPE declaration that specifies which version of HTML the document uses. Originally, the DOCTYPE declaration was used only by SGML-based tools like HTML validators, which needed to determine which version of HTML a document used (or claimed to use).
Today, many browsers use the document's DOCTYPE declaration to determine whether to use a stricter, more standards-oriented layout mode, or to use a "quirks" layout mode that attempts to emulate older, buggy browsers.
Can I Nest Tables Within Tables?
Yes, a table can be embedded inside a cell in another table. Here's a simple example
<table>
<tr>
<td>this is the first cell of the outer table</td>
<td>this is the second cell of the outer table,
with the inner table embedded in it
<table>
<tr>
<td>this is the first cell of the inner table</td>
<td>this is the second cell of the inner table</td>
</tr>
</table>
</td>
</tr>
</table>
The main caveat about nested tables is that older versions of Netscape Navigator have problems with them if you don't explicitly close your TR, TD, and TH elements. To avoid problems, include every </tr>, </td>, and </th> tag, even though the HTML specifications don't require them. Also, older versions of Netscape Navigator have problems with tables that are nested extremely deeply (e.g., tables nested ten deep). To avoid problems, avoid nesting tables more than a few deep. You may be able to use the ROWSPAN and COLSPAN attributes to minimize table nesting. Finally, be especially sure to validate your markup whenever you use nested tables.
How Do I Align A Table To The Right (or Left)?
You can use <TABLE ALIGN="right"> to float a table to the right. (Use ALIGN="left" to float it to the left.) Any content that follows the closing </TABLE> tag will flow around the table. Use <BR CLEAR="right"> or <BR CLEAR="all"> to mark the end of the text that is to flow around the table, as shown in this example
The table in this example will float to the right.
<table align="right">...</table>
This text will wrap to fill the available space to the left of (and if the text is long enough, below) the table.
<br clear="right">
This text will appear below the table, even if there is additional room to its left.
 |
| ThoughtWorks Most Frequently Asked HTML Interview Questions Answers |
How Can I Use Tables To Structure Forms?
Small forms are sometimes placed within a TD element within a table. This can be a useful for positioning a form relative to other content, but it doesn't help position the form-related elements relative to each other.
To position form-related elements relative to each other, the entire table must be within the form. You cannot start a form in one TH or TD element and end in another. You cannot place the form within the table without placing it inside a TH or TD element. You can put the table inside the form, and then use the table to position the INPUT, TEXTAREA, SELECT, and other form-related elements, as shown in the following example.
<FORM ACTION="[URL]">
<TABLE BORDER="0">
<TR>
<TH>Account:</TH>
<TD><INPUT TYPE="text" NAME="account"></TD>
</TR>
<TR>
<TH>Password:</TH>
<TD><INPUT TYPE="password" NAME="password"></TD>
</TR>
<TR>
<TD> </TD>
<TD><INPUT TYPE="submit" NAME="Log On"></TD>
</TR>
</TABLE>
</FORM>
What Is A Tag?
In HTML, a tag tells the browser what to do. When you write an HTML page, you enter tags for many reasons -- to change the appearance of text, to show a graphic, or to make a link to another page.
What Is The Simplest Html Page?
HTML Code
<HTML>
<HEAD>
<TITLE>This is my page title! </TITLE>
</HEAD>
<BODY>
This is my message to the world!
</BODY>
</HTML>
Browser Display
This is my message to the world!
How Do I Create Frames? What Is A Frameset?
Frames allow an author to divide a browser window into multiple (rectangular) regions. Multiple documents can be displayed in a single window, each within its own frame. Graphical browsers allow these frames to be scrolled independently of each other, and links can update the document displayed in one frame without affecting the others.
You can't just "add frames" to an existing document. Rather, you must create a frameset document that defines a particular combination of frames, and then display your content documents inside those frames. The frameset document should also include alternative non-framed content in a NOFRAMES element. The HTML 4 frames model has significant design flaws that cause usability problems for web users. Frames should be used only with great care.
How Can I Include Comments In Html?
Technically, since HTML is an SGML application, HTML uses SGML comment syntax. However, the full syntax is complex, and browsers don't support it in its entirety anyway. Therefore, use the following simplified rule to create HTML comments that both have valid syntax and work in browsers
An HTML comment begins with "<!--", ends with "-->", and does not contain "--" or ">" anywhere in the comment.
The following are examples of HTML comments
* <!-- This is a comment. -->
* <!-- This is another comment,
and it continues onto a second line. -->
* <!---->
Do not put comments inside tags (i.e., between "<" and ">") in HTML markup.
What Is A Hypertext Link?
A hypertext link is a special tag that links one page to another page or resource. If you click the link, the browser jumps to the link's destination.
How Do I Center A Table?
In your HTML, use
<div class="center">
<table>...</table>
</div>
In your CSS, use
div.center {
text-align: center;
}
div.center table {
margin-left: auto;
margin-right: auto;
text-align: left;
}
How Do I Use Forms?
The basic syntax for a form is: <FORM ACTION="[URL]">...</FORM>
When the form is submitted, the form data is sent to the URL specified in the ACTION attribute. This URL should refer to a server-side (e.g., CGI) program that will process the form data. The form itself should contain
* at least one submit button (i.e., an <INPUT TYPE="submit" ...> element),
* form data elements (e.g., <INPUT>, <TEXTAREA>, and <SELECT>) as needed, and
* additional markup (e.g., identifying data elements, presenting instructions) as needed.
https://mytecbooks.blogspot.com/2019/06/thoughtworks-asked-html-interview.html