Mindtree Frequently Asked C Language Interview Questions Answers
What is the modulus operator?
The modulus operator outputs the remainder of a division. It makes use of the percentage (%) symbol. For example: 10 % 3 = 1, meaning when you divide 10 by 3, the remainder is 1.
What is a nested loop?
A nested loop is a loop that runs within another loop. Put it in another sense, you have an inner loop that is inside an outer loop. In this scenario, the inner loop is performed a number of times as specified by the outer loop. For each turn on the outer loop, the inner loop is first performed.
Which of the following operators is incorrect and why? ( >=, <=, <>, ==)
<> is incorrect. While this operator is correctly interpreted as “not equal to” in writing conditional statements, it is not the proper operator to be used in C programming. Instead, the operator != must be used to indicate “not equal to” condition.
Compare and contrast compilers from interpreters.
Compilers and interpreters often deal with how program codes are executed. Interpreters execute program codes one line at a time, while compilers take the program as a whole and convert it into object code, before executing it. The key difference here is that in the case of interpreters, a program may encounter syntax errors in the middle of execution, and will stop from there. On the other hand, compilers check the syntax of the entire program and will only proceed to execution when no syntax errors are found.
How do you declare a variable that will hold string values?
The char keyword can only hold 1 character value at a time. By creating an array of characters, you can store string values in it. Example: “char MyName[50]; ” declares a string variable named MyName that can hold a maximum of 50 characters.
Can the curly brackets { } be used to enclose a single line of code?
While curly brackets are mainly used to group several lines of codes, it will still work without error if you used it for a single line. Some programmers prefer this method as a way of organizing codes to make it look clearer, especially in conditional statements.
What are header files and what are its uses in C programming?
Header files are also known as library files. They contain two essential things: the definitions and prototypes of functions being used in a program. Simply put, commands that you use in C programming are actually functions that are defined from within each header files. Each header file contains a set of functions. For example: stdio.h is a header file that contains definition and prototypes of commands like printf and scanf.
What is syntax error?
Syntax errors are associated with mistakes in the use of a programming language. It maybe a command that was misspelled or a command that must was entered in lowercase mode but was instead entered with an upper case character. A misplaced symbol, or lack of symbol, somewhere within a line of code can also lead to syntax error.
What are variables and it what way is it different from constants?
Variables and constants may at first look similar in a sense that both are identifiers made up of one character or more characters (letters, numbers and a few allowable symbols). Both will also hold a particular value. Values held by a variable can be altered throughout the program, and can be used in most operations and computations. Constants are given values at one time only, placed at the beginning of a program. This value is not altered in the program. For example, you can assigned a constant named PI and give it a value 3.1415 . You can then use it as PI in the program, instead of having to write 3.1415 each time you need it.
How do you construct an increment statement or decrement statement in C?
There are actually two ways you can do this. One is to use the increment operator ++ and decrement operator –. For example, the statement “x++” means to increment the value of x by 1. Likewise, the statement “x –” means to decrement the value of x by 1. Another way of writing increment statements is to use the conventional + plus sign or – minus sign. In the case of “x++”, another way to write it is “x = x +1″.
What is the difference between Call by Value and Call by Reference?
When using Call by Value, you are sending the value of a variable as parameter to a function, whereas Call by Reference sends the address of the variable. Also, under Call by Value, the value in the parameter is not affected by whatever operation that takes place, while in the case of Call by Reference, values can be affected by the process within the function.
Some coders debug their programs by placing comment symbols on some codes instead of deleting it. How does this aid in debugging?
Placing comment symbols /* */ around a code, also referred to as “commenting out”, is a way of isolating some codes that you think maybe causing errors in the program, without deleting the code. The idea is that if the code is in fact correct, you simply remove the comment symbols and continue on. It also saves you time and effort on having to retype the codes if you have deleted it in the first place.
What is the equivalent code of the following statement in WHILE LOOP format?
for (a=1; a<=100; a++)
printf ("%d\n", a * a);
Answer:
a=1;
while (a<=100) {
printf ("%d\n", a * a);
a++;
How do you access the values within an array?
Arrays contain a number of elements, depending on the size you gave it during variable declaration. Each element is assigned a number from 0 to number of elements-1. To assign or retrieve the value of a particular element, refer to the element number. For example: if you have a declaration that says “intscores[5];”, then you have 5 accessible elements, namely: scores[0], scores[1], scores[2], scores[3] and scores[4].
Can I use “int” data type to store the value 32768? Why?
No. “int” data type is capable of storing values from -32768 to 32767. To store 32768, you can use “long int” instead. You can also use “unsigned int”, assuming you don’t intend to store negative values.
Can two or more operators such as \n and \t be combined in a single line of program code?
Yes, it’s perfectly valid to combine operators, especially if the need arises. For example: you can have a code like ” printf (“Hello\n\n\’World\'”) ” to output the text “Hello” on the first line and “World” enclosed in single quotes to appear on the next two lines.
Why is it that not all header files are declared in every C program?
The choice of declaring a header file at the top of each C program would depend on what commands/functions you will be using in that program. Since each header file contains different function definitions and prototype, you would be using only those header files that would contain the functions you will need. Declaring all header files in every program would only increase the overall file size and load of the program, and is not considered a good programming style.
When is the “void” keyword used in a function?
When declaring functions, you will decide whether that function would be returning a value or not. If that function will not return a value, such as when the purpose of a function is to display some outputs on the screen, then “void” is to be placed at the leftmost part of the function header. When a return value is expected after the function execution, the data type of the return value is placed instead of “void”.
What are compound statements?
Compound statements are made up of two or more program statements that are executed together. This usually occurs while handling conditions wherein a series of statements are executed when a TRUE or FALSE is evaluated. Compound statements can also be executed within a loop. Curly brackets { } are placed before and after compound statements.
Write a program to check Armstrong number in C?
#include<stdio.h>
#include<conio.h>
main()
{
int n,r,sum=0,temp; //declaration of variables.
clrscr(); //It clears the screen.
printf("enter the number=");
scanf("%d",&n);
temp=n;
while(n>0)
{
r=n%10;
sum=sum+(r*r*r);
n=n/10;
}
if(temp==sum)
printf("armstrong number ");
else
printf("not armstrong number");
getch(); //It reads a character from the keyword.
}
Write a program to reverse a given number in C?
#include<stdio.h>
#include<conio.h>
main()
{
int n, reverse=0, rem; //declaration of variables.
clrscr(); // It clears the screen.
printf("Enter a number: ");
scanf("%d", &n);
while(n!=0)
{
rem=n%10;
reverse=reverse*10+rem;
n/=10;
}
printf("Reversed Number: %d",reverse);
getch(); // It reads a character from the keyword.
}
What does the && operator do in a program code?
The && is also referred to as AND operator. When using this operator, all conditions specified must be TRUE before the next action can be performed. If you have 10 conditions and all but 1 fails to evaluate as TRUE, the entire condition statement is already evaluated as FALSE.
In C programming, what command or code can be used to determine if a number of odd or even?
There is no single command or function in C that can check if a number is odd or even. However, this can be accomplished by dividing that number by 2, then checking the remainder. If the remainder is 0, then that number is even, otherwise, it is odd. You can write it in code as:
if (num % 2 == 0)
printf("EVEN");
else
printf("ODD");
What does the format %10.2 mean when included in a printf statement?
This format is used for two things: to set the number of spaces allotted for the output number and to set the number of decimal places. The number before the decimal point is for the allotted space, in this case it would allot 10 spaces for the output number. If the number of space occupied by the output number is less than 10, addition space characters will be inserted before the actual output number. The number after the decimal point sets the number of decimal places, in this case, it’s 2 decimal spaces.
What are logical errors and how does it differ from syntax errors?
Program that contains logical errors tend to pass the compilation process, but the resulting output may not be the expected one. This happens when a wrong formula was inserted into the code, or a wrong sequence of commands was performed. Syntax errors, on the other hand, deal with incorrect commands that are misspelled or not recognized by the compiler.
What is the use of a semicolon (;) at the end of every program statement?
It has to do with the parsing process and compilation of the code. A semicolon acts as a delimiter, so that the compiler knows where each statement ends, and can proceed to divide the statement into smaller elements for syntax checking.
What is difference between i++ and ++i?
1) The expression ‘i++’ returns the old value and then increments i. The expression ++i increments the value and returns new value.
2) Precedence of postfix ++ is higher than that of prefix ++.
3) Associativity of postfix ++ is left to right and associativity of prefix ++ is right to left.
4) In C++, ++i can be used as l-value, but i++ cannot be. In C, they both cannot be used as l-value.
What is l-value?
l-value or location value refers to an expression that can be used on left side of assignment operator. For example in expression “a = 3”, a is l-value and 3 is r-value.
l-values are of two types:
“nonmodifiable l-value” represent a l-value that can not be modified. const variables are “nonmodifiable l-value”.
“modifiable l-value” represent a l-value that can be modified.
How to write your own sizeof operator?
#define my_sizeof(type) (char *)(&type+1)-(char*)(&type)
How will you print numbers from 1 to 100 without using loop?
We can use recursion for this purpose.
/* Prints numbers from 1 to n */
void printNos(unsigned int n)
{
if(n > 0)
{
printNos(n-1);
printf("%d ", n);
}
}
What is volatile keyword?
The volatile keyword is intended to prevent the compiler from applying any optimizations on objects that can change in ways that cannot be determined by the compiler.
Objects declared as volatile are omitted from optimization because their values can be changed by code outside the scope of current code at any time. See Understanding “volatile” qualifier in C for more details.
Can a variable be both const and volatile?
yes, the const means that the variable cannot be assigned a new value. The value can be changed by other code or pointer. For example the following program works fine.
int main(void)
{
const volatile int local = 10;
int *ptr = (int*) &local;
printf("Initial value of local : %d \n", local);
*ptr = 100;
printf("Modified value of local: %d \n", local);
return 0;
}
Write a program to print "hello world" without using a semicolon?
#include<stdio.h>
void main(){
if(printf("hello world")){} // It prints the ?hello world? on the screen.
}
What is the modulus operator?
The modulus operator outputs the remainder of a division. It makes use of the percentage (%) symbol. For example: 10 % 3 = 1, meaning when you divide 10 by 3, the remainder is 1.
What is a nested loop?
A nested loop is a loop that runs within another loop. Put it in another sense, you have an inner loop that is inside an outer loop. In this scenario, the inner loop is performed a number of times as specified by the outer loop. For each turn on the outer loop, the inner loop is first performed.
Which of the following operators is incorrect and why? ( >=, <=, <>, ==)
<> is incorrect. While this operator is correctly interpreted as “not equal to” in writing conditional statements, it is not the proper operator to be used in C programming. Instead, the operator != must be used to indicate “not equal to” condition.
Compare and contrast compilers from interpreters.
Compilers and interpreters often deal with how program codes are executed. Interpreters execute program codes one line at a time, while compilers take the program as a whole and convert it into object code, before executing it. The key difference here is that in the case of interpreters, a program may encounter syntax errors in the middle of execution, and will stop from there. On the other hand, compilers check the syntax of the entire program and will only proceed to execution when no syntax errors are found.
How do you declare a variable that will hold string values?
The char keyword can only hold 1 character value at a time. By creating an array of characters, you can store string values in it. Example: “char MyName[50]; ” declares a string variable named MyName that can hold a maximum of 50 characters.
Can the curly brackets { } be used to enclose a single line of code?
While curly brackets are mainly used to group several lines of codes, it will still work without error if you used it for a single line. Some programmers prefer this method as a way of organizing codes to make it look clearer, especially in conditional statements.
What are header files and what are its uses in C programming?
Header files are also known as library files. They contain two essential things: the definitions and prototypes of functions being used in a program. Simply put, commands that you use in C programming are actually functions that are defined from within each header files. Each header file contains a set of functions. For example: stdio.h is a header file that contains definition and prototypes of commands like printf and scanf.
What is syntax error?
Syntax errors are associated with mistakes in the use of a programming language. It maybe a command that was misspelled or a command that must was entered in lowercase mode but was instead entered with an upper case character. A misplaced symbol, or lack of symbol, somewhere within a line of code can also lead to syntax error.
What are variables and it what way is it different from constants?
Variables and constants may at first look similar in a sense that both are identifiers made up of one character or more characters (letters, numbers and a few allowable symbols). Both will also hold a particular value. Values held by a variable can be altered throughout the program, and can be used in most operations and computations. Constants are given values at one time only, placed at the beginning of a program. This value is not altered in the program. For example, you can assigned a constant named PI and give it a value 3.1415 . You can then use it as PI in the program, instead of having to write 3.1415 each time you need it.
 |
| Mindtree Frequently Asked C Language Interview Questions Answers |
How do you construct an increment statement or decrement statement in C?
There are actually two ways you can do this. One is to use the increment operator ++ and decrement operator –. For example, the statement “x++” means to increment the value of x by 1. Likewise, the statement “x –” means to decrement the value of x by 1. Another way of writing increment statements is to use the conventional + plus sign or – minus sign. In the case of “x++”, another way to write it is “x = x +1″.
What is the difference between Call by Value and Call by Reference?
When using Call by Value, you are sending the value of a variable as parameter to a function, whereas Call by Reference sends the address of the variable. Also, under Call by Value, the value in the parameter is not affected by whatever operation that takes place, while in the case of Call by Reference, values can be affected by the process within the function.
Some coders debug their programs by placing comment symbols on some codes instead of deleting it. How does this aid in debugging?
Placing comment symbols /* */ around a code, also referred to as “commenting out”, is a way of isolating some codes that you think maybe causing errors in the program, without deleting the code. The idea is that if the code is in fact correct, you simply remove the comment symbols and continue on. It also saves you time and effort on having to retype the codes if you have deleted it in the first place.
What is the equivalent code of the following statement in WHILE LOOP format?
for (a=1; a<=100; a++)
printf ("%d\n", a * a);
Answer:
a=1;
while (a<=100) {
printf ("%d\n", a * a);
a++;
}
Arrays contain a number of elements, depending on the size you gave it during variable declaration. Each element is assigned a number from 0 to number of elements-1. To assign or retrieve the value of a particular element, refer to the element number. For example: if you have a declaration that says “intscores[5];”, then you have 5 accessible elements, namely: scores[0], scores[1], scores[2], scores[3] and scores[4].
Can I use “int” data type to store the value 32768? Why?
No. “int” data type is capable of storing values from -32768 to 32767. To store 32768, you can use “long int” instead. You can also use “unsigned int”, assuming you don’t intend to store negative values.
Can two or more operators such as \n and \t be combined in a single line of program code?
Yes, it’s perfectly valid to combine operators, especially if the need arises. For example: you can have a code like ” printf (“Hello\n\n\’World\'”) ” to output the text “Hello” on the first line and “World” enclosed in single quotes to appear on the next two lines.
Why is it that not all header files are declared in every C program?
The choice of declaring a header file at the top of each C program would depend on what commands/functions you will be using in that program. Since each header file contains different function definitions and prototype, you would be using only those header files that would contain the functions you will need. Declaring all header files in every program would only increase the overall file size and load of the program, and is not considered a good programming style.
When is the “void” keyword used in a function?
When declaring functions, you will decide whether that function would be returning a value or not. If that function will not return a value, such as when the purpose of a function is to display some outputs on the screen, then “void” is to be placed at the leftmost part of the function header. When a return value is expected after the function execution, the data type of the return value is placed instead of “void”.
What are compound statements?
Compound statements are made up of two or more program statements that are executed together. This usually occurs while handling conditions wherein a series of statements are executed when a TRUE or FALSE is evaluated. Compound statements can also be executed within a loop. Curly brackets { } are placed before and after compound statements.
Write a program to check Armstrong number in C?
#include<stdio.h>
#include<conio.h>
main()
{
int n,r,sum=0,temp; //declaration of variables.
clrscr(); //It clears the screen.
printf("enter the number=");
scanf("%d",&n);
temp=n;
while(n>0)
{
r=n%10;
sum=sum+(r*r*r);
n=n/10;
}
if(temp==sum)
printf("armstrong number ");
else
printf("not armstrong number");
getch(); //It reads a character from the keyword.
}
Write a program to reverse a given number in C?
#include<stdio.h>
#include<conio.h>
main()
{
int n, reverse=0, rem; //declaration of variables.
clrscr(); // It clears the screen.
printf("Enter a number: ");
scanf("%d", &n);
while(n!=0)
{
rem=n%10;
reverse=reverse*10+rem;
n/=10;
}
printf("Reversed Number: %d",reverse);
getch(); // It reads a character from the keyword.
}
What does the && operator do in a program code?
The && is also referred to as AND operator. When using this operator, all conditions specified must be TRUE before the next action can be performed. If you have 10 conditions and all but 1 fails to evaluate as TRUE, the entire condition statement is already evaluated as FALSE.
In C programming, what command or code can be used to determine if a number of odd or even?
There is no single command or function in C that can check if a number is odd or even. However, this can be accomplished by dividing that number by 2, then checking the remainder. If the remainder is 0, then that number is even, otherwise, it is odd. You can write it in code as:
if (num % 2 == 0)
printf("EVEN");
else
printf("ODD");
What does the format %10.2 mean when included in a printf statement?
This format is used for two things: to set the number of spaces allotted for the output number and to set the number of decimal places. The number before the decimal point is for the allotted space, in this case it would allot 10 spaces for the output number. If the number of space occupied by the output number is less than 10, addition space characters will be inserted before the actual output number. The number after the decimal point sets the number of decimal places, in this case, it’s 2 decimal spaces.
What are logical errors and how does it differ from syntax errors?
Program that contains logical errors tend to pass the compilation process, but the resulting output may not be the expected one. This happens when a wrong formula was inserted into the code, or a wrong sequence of commands was performed. Syntax errors, on the other hand, deal with incorrect commands that are misspelled or not recognized by the compiler.
What is the use of a semicolon (;) at the end of every program statement?
It has to do with the parsing process and compilation of the code. A semicolon acts as a delimiter, so that the compiler knows where each statement ends, and can proceed to divide the statement into smaller elements for syntax checking.
What is difference between i++ and ++i?
1) The expression ‘i++’ returns the old value and then increments i. The expression ++i increments the value and returns new value.
2) Precedence of postfix ++ is higher than that of prefix ++.
3) Associativity of postfix ++ is left to right and associativity of prefix ++ is right to left.
4) In C++, ++i can be used as l-value, but i++ cannot be. In C, they both cannot be used as l-value.
What is l-value?
l-value or location value refers to an expression that can be used on left side of assignment operator. For example in expression “a = 3”, a is l-value and 3 is r-value.
l-values are of two types:
“nonmodifiable l-value” represent a l-value that can not be modified. const variables are “nonmodifiable l-value”.
“modifiable l-value” represent a l-value that can be modified.
How to write your own sizeof operator?
#define my_sizeof(type) (char *)(&type+1)-(char*)(&type)
How will you print numbers from 1 to 100 without using loop?
We can use recursion for this purpose.
/* Prints numbers from 1 to n */
void printNos(unsigned int n)
{
if(n > 0)
{
printNos(n-1);
printf("%d ", n);
}
}
What is volatile keyword?
The volatile keyword is intended to prevent the compiler from applying any optimizations on objects that can change in ways that cannot be determined by the compiler.
Objects declared as volatile are omitted from optimization because their values can be changed by code outside the scope of current code at any time. See Understanding “volatile” qualifier in C for more details.
Can a variable be both const and volatile?
yes, the const means that the variable cannot be assigned a new value. The value can be changed by other code or pointer. For example the following program works fine.
int main(void)
{
const volatile int local = 10;
int *ptr = (int*) &local;
printf("Initial value of local : %d \n", local);
*ptr = 100;
printf("Modified value of local: %d \n", local);
return 0;
}
Write a program to print "hello world" without using a semicolon?
#include<stdio.h>
void main(){
if(printf("hello world")){} // It prints the ?hello world? on the screen.
}
Post a Comment