What is a stack?
A stack is one form of a data structure. Data is stored in stacks using the FILO (First In Last Out) approach. At any particular instance, only the top of the stack is accessible, which means that in order to retrieve data that is stored inside the stack, those on the upper part should be extracted first. Storing data in a stack is also referred to as a PUSH, while data retrieval is referred to as a POP.
What is a sequential access file?
When writing programs that will store and retrieve data in a file, it is possible to designate that file into different forms. A sequential access file is such that data are saved in sequential order: one data is placed into the file after another. To access a particular data within the sequential access file, data has to be read one data at a time, until the right one is reached.
What is variable initialization and why is it important?
This refers to the process wherein a variable is assigned an initial value before it is used in the program. Without initialization, a variable would have an unknown value, which can lead to unpredictable outputs when used in computations or other operations.
What is spaghetti programming?
Spaghetti programming refers to codes that tend to get tangled and overlapped throughout the program. This unstructured approach to coding is usually attributed to lack of experience on the part of the programmer. Spaghetti programing makes a program complex and analyzing the codes difficult, and so must be avoided as much as possible.
Differentiate Source Codes from Object Codes
Source codes are codes that were written by the programmer. It is made up of the commands and other English-like keywords that are supposed to instruct the computer what to do. However, computers would not be able to understand source codes. Therefore, source codes are compiled using a compiler. The resulting outputs are object codes, which are in a format that can be understood by the computer processor. In C programming, source codes are saved with the file extension .C, while object codes are saved with the file extension .OBJ
In C programming, how do you insert quote characters (‘ and “) into the output screen?
This is a common problem for beginners because quotes are normally part of a printf statement. To insert the quote character as part of the output, use the format specifiers \’ (for single quote), and \” (for double quote).
What is the use of a ‘\0′ character?
It is referred to as a terminating null character, and is used primarily to show the end of a string value.
What is the difference between the = symbol and == symbol?
The = symbol is often used in mathematical operations. It is used to assign a value to a given variable. On the other hand, the == symbol, also known as “equal to” or “equivalent to”, is a relational operator that is used to compare two values.
What is the modulus operator?
The modulus operator outputs the remainder of a division. It makes use of the percentage (%) symbol. For example: 10 % 3 = 1, meaning when you divide 10 by 3, the remainder is 1.
What is a nested loop?
A nested loop is a loop that runs within another loop. Put it in another sense, you have an inner loop that is inside an outer loop. In this scenario, the inner loop is performed a number of times as specified by the outer loop. For each turn on the outer loop, the inner loop is first performed.
Which of the following operators is incorrect and why? ( >=, <=, <>, ==)
<> is incorrect. While this operator is correctly interpreted as “not equal to” in writing conditional statements, it is not the proper operator to be used in C programming. Instead, the operator != must be used to indicate “not equal to” condition.
Compare and contrast compilers from interpreters.
Compilers and interpreters often deal with how program codes are executed. Interpreters execute program codes one line at a time, while compilers take the program as a whole and convert it into object code, before executing it. The key difference here is that in the case of interpreters, a program may encounter syntax errors in the middle of execution, and will stop from there. On the other hand, compilers check the syntax of the entire program and will only proceed to execution when no syntax errors are found.
How do you declare a variable that will hold string values?
The char keyword can only hold 1 character value at a time. By creating an array of characters, you can store string values in it. Example: “char MyName[50]; ” declares a string variable named MyName that can hold a maximum of 50 characters.
Can the curly brackets { } be used to enclose a single line of code?
While curly brackets are mainly used to group several lines of codes, it will still work without error if you used it for a single line. Some programmers prefer this method as a way of organizing codes to make it look clearer, especially in conditional statements.
What are header files and what are its uses in C programming?
Header files are also known as library files. They contain two essential things: the definitions and prototypes of functions being used in a program. Simply put, commands that you use in C programming are actually functions that are defined from within each header files. Each header file contains a set of functions. For example: stdio.h is a header file that contains definition and prototypes of commands like printf and scanf.
What is syntax error?
Syntax errors are associated with mistakes in the use of a programming language. It maybe a command that was misspelled or a command that must was entered in lowercase mode but was instead entered with an upper case character. A misplaced symbol, or lack of symbol, somewhere within a line of code can also lead to syntax error.
What are variables and it what way is it different from constants?
Variables and constants may at first look similar in a sense that both are identifiers made up of one character or more characters (letters, numbers and a few allowable symbols). Both will also hold a particular value. Values held by a variable can be altered throughout the program, and can be used in most operations and computations. Constants are given values at one time only, placed at the beginning of a program. This value is not altered in the program. For example, you can assigned a constant named PI and give it a value 3.1415 . You can then use it as PI in the program, instead of having to write 3.1415 each time you need it.
How do you construct an increment statement or decrement statement in C?
There are actually two ways you can do this. One is to use the increment operator ++ and decrement operator –. For example, the statement “x++” means to increment the value of x by 1. Likewise, the statement “x –” means to decrement the value of x by 1. Another way of writing increment statements is to use the conventional + plus sign or – minus sign. In the case of “x++”, another way to write it is “x = x +1″.
What is the difference between Call by Value and Call by Reference?
When using Call by Value, you are sending the value of a variable as parameter to a function, whereas Call by Reference sends the address of the variable. Also, under Call by Value, the value in the parameter is not affected by whatever operation that takes place, while in the case of Call by Reference, values can be affected by the process within the function.
Some coders debug their programs by placing comment symbols on some codes instead of deleting it. How does this aid in debugging?
Placing comment symbols /* */ around a code, also referred to as “commenting out”, is a way of isolating some codes that you think maybe causing errors in the program, without deleting the code. The idea is that if the code is in fact correct, you simply remove the comment symbols and continue on. It also saves you time and effort on having to retype the codes if you have deleted it in the first place.
What is the equivalent code of the following statement in WHILE LOOP format?
for (a=1; a<=100; a++)
printf ("%d\n", a * a);
Answer:
a=1;
while (a<=100) {
printf ("%d\n", a * a);
a++;
A stack is one form of a data structure. Data is stored in stacks using the FILO (First In Last Out) approach. At any particular instance, only the top of the stack is accessible, which means that in order to retrieve data that is stored inside the stack, those on the upper part should be extracted first. Storing data in a stack is also referred to as a PUSH, while data retrieval is referred to as a POP.
What is a sequential access file?
When writing programs that will store and retrieve data in a file, it is possible to designate that file into different forms. A sequential access file is such that data are saved in sequential order: one data is placed into the file after another. To access a particular data within the sequential access file, data has to be read one data at a time, until the right one is reached.
What is variable initialization and why is it important?
This refers to the process wherein a variable is assigned an initial value before it is used in the program. Without initialization, a variable would have an unknown value, which can lead to unpredictable outputs when used in computations or other operations.
What is spaghetti programming?
Spaghetti programming refers to codes that tend to get tangled and overlapped throughout the program. This unstructured approach to coding is usually attributed to lack of experience on the part of the programmer. Spaghetti programing makes a program complex and analyzing the codes difficult, and so must be avoided as much as possible.
 |
| Intuit Most Frequently Asked Latest C Language Interview Questions Answers |
Differentiate Source Codes from Object Codes
Source codes are codes that were written by the programmer. It is made up of the commands and other English-like keywords that are supposed to instruct the computer what to do. However, computers would not be able to understand source codes. Therefore, source codes are compiled using a compiler. The resulting outputs are object codes, which are in a format that can be understood by the computer processor. In C programming, source codes are saved with the file extension .C, while object codes are saved with the file extension .OBJ
In C programming, how do you insert quote characters (‘ and “) into the output screen?
This is a common problem for beginners because quotes are normally part of a printf statement. To insert the quote character as part of the output, use the format specifiers \’ (for single quote), and \” (for double quote).
What is the use of a ‘\0′ character?
It is referred to as a terminating null character, and is used primarily to show the end of a string value.
What is the difference between the = symbol and == symbol?
The = symbol is often used in mathematical operations. It is used to assign a value to a given variable. On the other hand, the == symbol, also known as “equal to” or “equivalent to”, is a relational operator that is used to compare two values.
What is the modulus operator?
The modulus operator outputs the remainder of a division. It makes use of the percentage (%) symbol. For example: 10 % 3 = 1, meaning when you divide 10 by 3, the remainder is 1.
What is a nested loop?
A nested loop is a loop that runs within another loop. Put it in another sense, you have an inner loop that is inside an outer loop. In this scenario, the inner loop is performed a number of times as specified by the outer loop. For each turn on the outer loop, the inner loop is first performed.
Which of the following operators is incorrect and why? ( >=, <=, <>, ==)
<> is incorrect. While this operator is correctly interpreted as “not equal to” in writing conditional statements, it is not the proper operator to be used in C programming. Instead, the operator != must be used to indicate “not equal to” condition.
Compare and contrast compilers from interpreters.
Compilers and interpreters often deal with how program codes are executed. Interpreters execute program codes one line at a time, while compilers take the program as a whole and convert it into object code, before executing it. The key difference here is that in the case of interpreters, a program may encounter syntax errors in the middle of execution, and will stop from there. On the other hand, compilers check the syntax of the entire program and will only proceed to execution when no syntax errors are found.
How do you declare a variable that will hold string values?
The char keyword can only hold 1 character value at a time. By creating an array of characters, you can store string values in it. Example: “char MyName[50]; ” declares a string variable named MyName that can hold a maximum of 50 characters.
Can the curly brackets { } be used to enclose a single line of code?
While curly brackets are mainly used to group several lines of codes, it will still work without error if you used it for a single line. Some programmers prefer this method as a way of organizing codes to make it look clearer, especially in conditional statements.
What are header files and what are its uses in C programming?
Header files are also known as library files. They contain two essential things: the definitions and prototypes of functions being used in a program. Simply put, commands that you use in C programming are actually functions that are defined from within each header files. Each header file contains a set of functions. For example: stdio.h is a header file that contains definition and prototypes of commands like printf and scanf.
What is syntax error?
Syntax errors are associated with mistakes in the use of a programming language. It maybe a command that was misspelled or a command that must was entered in lowercase mode but was instead entered with an upper case character. A misplaced symbol, or lack of symbol, somewhere within a line of code can also lead to syntax error.
What are variables and it what way is it different from constants?
Variables and constants may at first look similar in a sense that both are identifiers made up of one character or more characters (letters, numbers and a few allowable symbols). Both will also hold a particular value. Values held by a variable can be altered throughout the program, and can be used in most operations and computations. Constants are given values at one time only, placed at the beginning of a program. This value is not altered in the program. For example, you can assigned a constant named PI and give it a value 3.1415 . You can then use it as PI in the program, instead of having to write 3.1415 each time you need it.
How do you construct an increment statement or decrement statement in C?
There are actually two ways you can do this. One is to use the increment operator ++ and decrement operator –. For example, the statement “x++” means to increment the value of x by 1. Likewise, the statement “x –” means to decrement the value of x by 1. Another way of writing increment statements is to use the conventional + plus sign or – minus sign. In the case of “x++”, another way to write it is “x = x +1″.
What is the difference between Call by Value and Call by Reference?
When using Call by Value, you are sending the value of a variable as parameter to a function, whereas Call by Reference sends the address of the variable. Also, under Call by Value, the value in the parameter is not affected by whatever operation that takes place, while in the case of Call by Reference, values can be affected by the process within the function.
Some coders debug their programs by placing comment symbols on some codes instead of deleting it. How does this aid in debugging?
Placing comment symbols /* */ around a code, also referred to as “commenting out”, is a way of isolating some codes that you think maybe causing errors in the program, without deleting the code. The idea is that if the code is in fact correct, you simply remove the comment symbols and continue on. It also saves you time and effort on having to retype the codes if you have deleted it in the first place.
What is the equivalent code of the following statement in WHILE LOOP format?
for (a=1; a<=100; a++)
printf ("%d\n", a * a);
Answer:
a=1;
while (a<=100) {
printf ("%d\n", a * a);
a++;
}